EZ-PULL ARMSTRONG DOWNRIGGER MOUNT
The EZ-Pull Armstrong davit can only be used with the downrigger mounts Model #1023 and #1026.
A metal backing plate has to be installed on the underside of the gunnel of the boat to strength the area for leverage where the downrigger pedestal is mounted.
We cannot guarantee the strength of the downrigger mounts or the gunnel of the boat. Install the davit on the downrigger swivel base assembly.
Insert the 3/3”x4” pin through the aluminum channel and the hole in the #1023 bracket. Install the retainer clip in the end of the 3/8”x4” pin.
There is an optional safety lanyard hole located in the gusset at the base of the pipe. You may want to tie a rope from that hole to a cleat on your boat.