UPDATED
The 3-piece EZ Puller Inc. - "E80X-SR"(Starboard Side) Salmon Trolling Downrigger. Made from our Extended height 1.5” Sch 80 Electric Pot Puller. The package includes our time tested water resistant 1.9 hp 601 Blue express 12v motor with a Permanently sealed cast aluminum gearbox containing roller bearings, 1 piece steel and bronze alloy worm drive gears in a synthetic oil bath for exceptional strength and long life. New watertight Aluminum switch box containing a 120amp reversing relay operated by a NEW IP69 Waterproof nylon switch. Supplied with 14 ft. 8-gauge harness and 80 amp re-settable circuit breaker assembly.
Comes complete with 12" x 2" Nylon Drum and hub assembly that easily holds 800 feet of 1/16th wire. Includes 4" enclosed wire/rope pulley, s/s Quick link and s/s davit pin are included
Supplied with our AMS104C UHMW Sleeved Flat Deck and AMS106 UHMW sleeved Gunnel Mounts.
Davit capacity is rated at 225lbs total.
Pulls line at up to 145 feet per minute while using a recommended 40# trolling weight.
The EZ-E80X-SR davit unit is 75“ tall and has a reach of 33“.
The unit comes with a 1 year manufacturer defect warranty.
Does not include fasteners for installing the mounts.
The EZ-E80X-SR is a dedicated electric salmon trolling downrigger built for starboard-side boat mounting, giving you automated, consistent line deployment on the water. Constructed from 1.5-inch Schedule 80 pipe, it stands 75" tall with a 33" reach and is davit-rated for a total capacity of 225 lbs.
Power comes from a 1.9 hp 601 Blue Express 12V water-resistant motor paired with a 120-amp reversing relay housed in an aluminum switch box, controlled through an IP69 waterproof nylon switch for long-term durability. It pulls line at up to 145 feet per minute and holds 800 feet of 1/16-inch wire on a 12" x 2" nylon drum and hub assembly, with a recommended 40-pound trolling weight.
The permanently sealed cast aluminum gearbox houses steel and bronze alloy worm drive gears in a synthetic oil bath, paired with a 4-inch enclosed wire/rope pulley and a stainless steel quick link and davit pin. It ships with AMS104C UHMW sleeved flat deck and AMS106 UHMW sleeved gunnel mounts included (fasteners not included) — browse our davit mounts for replacement or alternate mounting options. Wiring runs through a 14-foot 8-gauge electrical harness with an 80-amp resettable circuit breaker; explore our full range of electrical accessories to complete your setup.
Backed by a 1-year manufacturer defect warranty.
Compare Models
Rigging the port side too? This is the starboard counterpart to the EZ-E80X-SL Port Side Downrigger — most boats run one of each for balanced dual-line trolling.
Also need gear for pot or trap hauling? Browse our full lineup of electric pot haulers.
