The control lever operates in an On and Off position only.
MAINTAIN A SAFE DISTANCE. With arms extended, you should not be able to touch the 8” black puller sheave when it is turning. This is very important. Clothing and gloves need to be a snug fit with no hanging cords, etc. to avoid getting caught in the spinning 8” black puller sheave, idler roller or davit pulley block.
Install the line through the davit pulley block, then under the plastic idler roller, then over the 8” black puller sheave Move the control lever to the on position to raise the pot. As the pot is being raised, keep a slight tension on the line coming over the top of the 8” black puller sheave.
MONITOR incoming line closely for weights, snares and pot. Never allow weight, line snare or pot to reach the davit pulley block. Use davit in locked position only. NEVER have hands around or in front of 8” black puller sheave, idler roller or davit pulley while pulling pot.
When pot is up, TURN CONTROL OFF before bringing pot into boat.
Keep your eyes on the puller at all times during operation. DO NOT LOOK AWAY.
This unit should not be operated by anyone not familiar with the operation of the EZ-Pull Pot Puller. Do not allow operation by anyone under the influence of any drugs or alcohol, by anyone who lacks the physical abilities to safely operate this puller or by minors.
Rope must be in good condition. Most commonly used sizes are 1/4” and 5/16”, poly or nylon, twist or braided. Always check the s/s hardware holding the davit pulley block to be sure it is secure. PRACTICE operation to become familiar with the unit is advised before going fishing.
IF YOU HAVE ANY QUESTIONS REGARDING THE SAFE OPERATION OF THIS UNIT, PLEASE CALL YOUR DEALER.
The use of any plug configuration other than the optional plug package sold by manufacturer of EZ-Pull Pot Puller will nullify your warranty.